Flow Solutions Technology Advisor

With the largest team of technology experts around the world, Emerson is your partner for flow measurement solutions.

Find the right flow technology for your needs.

Get Started

Emerson

Flow Solutions Technology Advisor

What fluid type are you measuring? question

Please select one option below:

Gas Steam
Liquid

What is your desired flow measurement? question

Please select all applicable options below:

Mass
Volume

What is your pipe line size?

Please select one option below:

1/12"- <1/2" (DN1- <DN15) 3"- <12" (DN80- <DN300)
1/2"- <3" (DN15- <DN80) >12" (>DN300)

What is your minimum desired accuracy range? question

Please select one option below:

<0.25% 0.5% - 1%
0.25% - 0.5% >1%

What are the properties of your fluid? question

Please select one option below:

Corrosive Process Temperature
>393°F (200°C) None of the above
Wet, Rich Gas Process Pressure
>1450 psi (100 bar)

What is your minimum desired accuracy range? question

Please select one option below:

<0.25% 0.5% - 1%
0.25% - 0.5% >1%

What are the properties of your fluid? question

Please select all applicable options below:

Slurry Emulsions Erosive Non-Newtonian Process Pressure
>1450 psi (100 bar) Conductive
Dirty Water Corrosive Liquid High Viscosity Process Temperature
>393°F (200°C) Non-conductive None of the above

What is your minimum desired accuracy range? question

Please select one option below:

<0.25% 0.5% - 1%
0.25% - 0.5% >1%

Choose all the characteristics of your process steam:

Please select all applicable options below:

Superheated Steam >527 °F (300°C) Dirty Steam
Wet Steam Saturated steam

Do you have any specific application requirements? question

Please select all applicable options below:

Custody Transfer Marine Drinking water Cryogenic None of the above
Sanitary ASME B31.1 Bi-directional Measurement Safety Instrumented Systems (SIS)

Congratulations, the following Emerson Flow Technologies meet your specific needs.

Whatever your measurement needs, you can trust the industry-leading Emerson flow products from Daniel, Micro Motion, Rosemount and Roxar to deliver unparalleled real world performance, reliability and measurement confidence over decades of intense use.

We are sorry, but there are no Emerson Flow Technologies that meet your specific needs.

Please either refine your answers or contact an Emerson Flow Expert for more information.

Start Over

Want to learn more?

6 Technologies Match Your Selection

  • Conducts direct mass measurement with high accuracy and wide turndown
  • Built in analysis capability to enable understanding of process conditions

Learn More|View Products|Size & Select

  • Most common flow measurement technology with a long history of achieving high accuracy and repeatability
  • Includes no moving parts for simple maintenance, troubleshooting and rapid configuration without the need to calibrate

Learn More|View Products

  • Advanced diagnostics to monitor and verify meter health
  • Effective for both very low and very high volume flow rates

Learn More|View Products|Size & Select

  • Ensures highly accurate, repeatable measurement of clean fluids
  • Designed for maximum volume throughput with minimal pressure drop

Learn More|View Products

  • Effective for determining actual volumetric flow regardless of changes in the composition of the natural gas or hydrocarbon liquids being measured
  • Eliminate incremental pressure drop with full bore design while no moving parts reduce maintenance time and cost

View Products

  • Simplified installation, maintenance and verification
  • Nonclog design for maximum performance, reliability and enhanced safety

Learn More|View Products|Size & Select

Select the state of your process fluid.

Select the desired flow measurement, mass (direct or calculated) and/or volume (direct or calculated).

Select the desired range of the minimum accuracy necessary for your process.

Select all fluid properties for your process.

Select the desired range of the minimum accuracy necessary for your process.

Select all fluid properties for your process.

Select the desired range of the minimum accuracy necessary for your process.

Select all application requirements for your process.

 What fluid type are you measuring? What is your desired flow measurement? What is your pipe line size? What is your minimum desired accuracy range? What are the properties of your fluid? What is your minimum desired accuracy range? What are the properties of your fluid? What is your minimum desired accuracy range? Choose all the characteristics of your process steam: Do you have any specific application requirements?
X

HOW WE USE COOKIES: We use cookies and similar technologies to improve our website, to personalize website content to you, and to deliver advertising messages and offers on content that are relevant to you. For more specific information on how we use cookies and to change your cookie preferences, see our Cookie Notice. UNDERSTAND AND DON’T WANT TO SEE THIS MESSAGE AGAIN? Click here